Reviews

Types of Diving Board Platforms

Types of Diving Board Platforms


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Practiced by competitive divers and recreational swimmers alike, diving is a common way to enter a pool. But it carries a number of risks, from colliding with another swimmer to crashing into the bottom of the pool. Therefore, regulatory bodies set strict requirements for both home and competitive diving boards. Diving boards fall into three basic categories: springboards, platforms and diving blocks.

Springboards

A springboard is a diving board mounted on a spring, creating flex under the diver's body and allowing the diver to jump high into the air. Springboards offer adjustable fulcrums, allowing each diver to set his or her preferred level of flex. Competitive springboards are mounted at 1 meter and 3 meters above the water, but heights vary for home and recreational springboards. USA Diving requires springboards to extend at least 5 feet from the edge of the pool and strongly recommends safety rails. All springboards, regardless of use, should be coated in nonskid material for safety.

Platforms

A diving platform is a rigid, inflexible, horizontal surface used for dives from higher elevations than a springboard. Diving platforms are typically constructed of concrete. The highest competitive platforms are set at 10 meters, while lower heights vary between competitions. USA Diving requires competitive platforms to be at least 6 meters long and 2 meters wide. For safety, all diving platforms must be surrounded by guard rails on three sides and accessed by stairs rather than ladders.

Diving Blocks

Diving blocks, also known as starting blocks, are used by competitive swimmers. They are sloped to provide swimmers with maximum explosive power when entering the pool. Competitive diving blocks are governed by USA Swimming, which requires each block to be at least 0.5 meters by 0.5 meters in size. Diving blocks must be anchored to the deck and covered in nonskid material.

Home Diving Board Considerations

Your home pool allows tremendous flexibility in design, but safety must remain a paramount consideration. Some homeowners incorporate real or simulated rocks, platforms of natural materials or flexible springboards. The most important considerations in placing a home diving board are the part of your pool known as the diving envelope, which is the area in which divers will land, and the allowable height of the diving board based on the depth of the pool. The rules are extremely complicated, and you are liable if divers or swimmers in your pool are injured because of preventable mistakes. Always consult with a trained swimming pool and diving board expert when designing your layout.



Comments:

  1. Sagramour

    the useful question

  2. Duron

    It is a pity that I cannot speak now - there is no free time. I'll be back - I will definitely express my opinion.

  3. Matherson

    Funny situation

  4. Abd Al Jabbar

    I have been looking for such an answer for a long time

  5. Orestes

    Many thanks for the information, now I will not commit such error.



Write a message